DAP-1325 N300 Wi-Fi Range Extender
Configuring via Web-based Interface
User Manual
Advanced
In this menu you can add name servers.
DNS
On the Advanced / DNS page, you can add DNS servers to the system.
Figure 57. The Advanced / DNS page.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet.
On this page, you can specify the addresses of DNS servers manually.
If you want to specify the DNS server, click the ADD SERVER button (use the Name Servers
IPv4 section for IPv4 and the Name Servers IPv6 section for IPv6) and enter a DNS server
address. Then click the APPLY button.
To remove a DNS server from the page, click the Delete icon ( ) in the line of the address and
then click the APPLY button.
If needed, you can add your own address resource record.
3
To do this, click the ADD button.
Figure 58. The window for adding a DNS record.
3 You need to specify the IP address of the extender as a DNS server for clients of the DAP-1325 device to allow them
to use the records.
Page 72 of 92