Plc Settings - D-Link DHP-W311AV User Manual

Section 3 - Configuration
This section will show you how to configure your new D-Link PowerLine AV device using the web-based configuration utility.
Check the box to Enable Power Saving mode.
Power Saving:
Make sure the Network Name of all of the devices
Network Name:
within your PowerLine network are the same.
Public Network If you would like to make your PowerLine network
public, select Public, Network Name is HomePlugAV.
Name:
This is a commonly used Network Name, so it is less
secure than a private Network Name.
Private Network If you would like to make your PowerLine network more
Name: secure, select Private, Network Name is, and enter a
name in the text box.
Network List:
This section provides information on PowerLine AV
devices in your PowerLine network.
Scanning: Click this button to scan for new PowerLine devices.
This is automatically done periodically.
MAC Address: Select a name from the Computer Name drop-down
box and then click the << button to automatically enter
the device's MAC Address.
Port Number: Select TCP or UDP from the drop-down menu.
Priority: From the Priority drop-down menu, prioritize network
traffic based on the device (by Client) or the port (by
Port Numer) the traffic is on.
Clear: Clear settings for a rule with the Clear button.
Click Save Settings.
D-Link DHP-W311AV User Manual

PLC Settings

21