Lan Settings - Static Ip - D-Link DHP-W311AV User Manual

Section 3 - Configuration
Under LAN Settings, select Static IP to manually enter the Static IP LAN Connection Type.
LAN Connection
Select Static IP from the drop-down menu.
Type:
IPv4 Address:
Enter the IPv4 Address of the DHP-W310AV.
The default IP address is 192.168.0.50. If you
change the IP address, once you click Apply,
you will need to enter the new IP address in
your browser to return to the configuration
utility. You can also connect with the Device
Name. (See previous page.)
Subnet Mask:
Enter the Subnet Mask.
Default Gateway:
Enter the Default Gateway. This is usually
the LAN or internal IP address of your router.
DNS Server:
This is the Domain Name Server that looks
up addresses on the Internet. You may have a
specific one you need to connect to.
Click Save Settings.
D-Link DHP-W311AV User Manual

LAN Settings - Static IP

20