Bridge Multicast Forward All - Cisco SPS208G User Manual

Multicast

Bridge Multicast Forward All

Bridge Multicast Forward All
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Bridge Multicast Forward All Screen
The
LAGs to a device that is attached to a neighboring Multicast router or switch. Once
IGMP Snooping is enabled, Multicast packets are forwarded to the appropriate
port or VLAN.
To define Multicast packet forwarding to Multicast routers:
Click Multicast > Bridge Multicast Forward All. The
Screen
opens.
Figure 98 Bridge Multicast Forward All Screen
Bridge Multicast Forward All Screen
The
•
VLAN ID — DIsplays the VLAN for which Multicast parameters are
displayed.
The configuration options are as follows:
•
Static — Indicates the interface is user-defined.
•
Dynamic — Indicates the interface is configured dynamically.
•
Forbidden — Indicates the interface is not included the Multicast group,
even if IGMP Snooping designated the interface to join a Multicast group.
•
None — The interface is not configured for Multicast service.
contains fields for attaching ports or
Bridge Multicast Forward All
contains the following fields:
11
215