Class Map - Cisco SPS208G User Manual

QoS
Advanced Mode
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 1
STEP 2
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
The Policy Name Parameter area contains the following field:
•
Policy Name — Defines a new policy name.
Define the new Policy Name.
Click Add To List. The new policy name is defined and is displayed in the Policy
Name Table in the bottom half of the
Click Save & Close to save the new policy and close the
(clicking Save keeps the
To delete a policy name from the device:
In the Policy Name Table, select the entry.
Click Delete. The selected policy name is deleted from the device.

Class Map

The New Class Map Screen
ACL and/or one MAC ACL comprise a class map. Class maps are configured to
match packet criteria. For example, Class Map A can be assigned to packets
based only on an IP-based ACL or a MAC-based ACL. Class Map B can be
assigned to packets based on both an IP-based and a MAC-based ACL.
Class maps are matched to packets on a first-fit basis, which makes their order in
the Class Map Table very important.
To add class maps:
Click QoS > Advanced Mode. The
In the Add Alarms area, click Class Map Settings. The
opens.
Policy Name Screen
Policy Name Screen
contains parameters for defining class maps. One IP
Advanced Mode Screen
.
Policy Name Screen
open). The device is updated.
opens.
New Class Map Screen
9
178