Cisco SPS208G User Manual page 227

SNMP
Group Membership
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Click Add to List. The new group member is displayed in the User Table at the
bottom of the screen.
The Add to List button adds the group member to the User Table at the bottom of
the screen.
To modify an SNMP group member:
Select the group member in the User Table.
Define the relevant fields.
Click Update. The SNMP group member is updated in the User Table. The device
is updated.
To delete an SNMP group member from the device:
In the User Table, select the entry.
Click Delete. The selected SNMP group member is deleted from the device.
12
227