QoS
Advanced Mode
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Figure 81 New Aggregate Policer Screen
New Aggregate Policer Screen
The
•
Aggregate Policer Parameters
•
Aggregate Policer Table
The Aggregate Policer Parameters area contains the following fields:
•
Aggregate Policer Name— Specifies the Aggregate Policer Name.
•
Ingress Committed Information Rate (CIR) — Defines the Committed
Information Rate (CIR) in bits per second.
•
Ingress Committed Burst Size (CbS) — Defines the Committed Burst Size
(CbS) in bytes per second.
•
Exceed Action — Action assigned to incoming packets exceeding the CIR.
Possible values are:
-
Drop
— Drops packets exceeding the defined CIR value.
-
Remark DSCP
CIR value.
-
None
— Forwards packets exceeding the defined CIR value.
Define the relevant fields.
is divided into the following areas:
—Remarks packet's DSCP values exceeding the defined
9
181