Vlan To Port - Cisco SPS208G User Manual

VLAN Management

VLAN to Port

VLAN to Port
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
VLAN To Port Screen
The
To add VLAN membership to a port:
Click VLAN Management > VLAN to Port. The
Figure 21 VLAN To Port Screen
For 24-port devices, the
screens. To browse to a specific port entry, click the Previous, 1, 2, 3, and Next
links above the table.
VLAN To Port Screen
The
•
Unit No. — Indicates the stacking member being managed.
•
Port — Displays the port number.
•
Mode — Indicates the port mode. The possible values are:
-
General — Indicates the port belongs to VLANs, and each VLAN is user-
defined as tagged or untagged (full IEEE802. 1 q mode).
-
Access
— Indicates a port belongs to a single untagged VLAN.
contains fields for configuring VLANs to ports.
VLAN to Port Screen
contains the following fields:
VLAN To Port Screen
displays the ports on multiple
4
opens.
61