Cisco SPS208G User Manual page 245

Admin
Dynamic Address
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
To learn dynamic MAC addresses on a specific interface:
Click Admin > Dynamic Address. The
Figure 111 Dynamic Address Screen
The Dynamic Address Screen
•
General Parameters
•
Query Parameters
•
Query Results Table
The General Parameters area contains the following fields:
•
Address Aging — Specifies the amount of time the MAC address remains in
the Dynamic MAC Address table before it is timed out, if no traffic from the
source is detected. The default value is 300 seconds.
•
Clear Table — If checked, clears the MAC address table.
Dynamic Address Screen
contains the following areas:
13
opens.
245