Rmon History - Cisco SPS208G User Manual

Statistics

RMON History

RMON History
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
RMON History Control Screen - Setting Sampling
The
samples of data taken from ports. For example, the samples may include interface
definitions or polling periods.
To view RMON history information:
Click Statistics > RMON History. The
Figure 30 RMON History Control Screen - Setting Sampling
RMON History Control Screen
The
•
RMON History
•
Log Table
The RMON History area contains the following fields:
•
Source Interface — Indicates the interface from which the history samples
were taken. The possible field values are:
-
Unit No.
— Indicates the stacking member being managed.
-
Port
— Specifies the port from which the RMON information was taken.
-
LAG
— Specifies the LAG from which the RMON information was taken.
•
Sampling Interval — Indicates in seconds the time that samplings are taken
from the ports. The field range is 1-3600. The default is 1800 seconds
(equal to 30 minutes).
contains information about
RMON History Control Screen
is divided into the following areas:
5
opens.
76