Basic Mode - Cisco SPS208G User Manual

QoS

Basic Mode

Basic Mode
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Basic Mode Screen
The
Packets entering a network are classified at the edge of the QoS domain. When
the packets are assigned either DSCP or CoS value, Trust can be enabled globally.
If a packet's CoS tag and DSCP tag are mapped to different queues, the Trust
mode determines the queue to which the packet is assigned.
To define the Trust configuration:
Click QoS > Basic Mode. The
Figure 75 Basic Mode Screen
Basic Mode Screen
The
•
Trust Mode — Displays the trust mode. If a packet's CoS tag and DSCP tag
are mapped to different queues, the Trust Mode determines the queue to
which the packet is assigned. Possible values are:
-
CoS — Sets trust mode to CoS on the device. The CoS mapping
determines the packet queue.
-
DSCP
— Sets trust mode to DSCP on the device. The DSCP mapping
determines the packet queue.
contains information for enabling Trust on the device.
Basic Mode Screen
contains the following fields:
opens.
9
170