Cisco SPS208G User Manual page 43

Port Management
Link Aggregation
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Link Aggregation Screen
The
•
LAG — Displays the LAG ID number.
•
Description — Defines the user-defined LAG name.
•
Admin Status — Enables or disables traffic forwarding through the selected
LAG. The possible field values are:
-
Up
— Indicates traffic forwarding is enabled through this LAG.
-
Down
— Indicates traffic forwarding is disabled through this LAG.
•
Type — Displays the LAG type. Only ports matching this type can join this
LAG.
•
Link Status — Indicates if the LAG is currently linked. The possible field
values are:
-
Up
— Indicates the LAG is currently linked, and is forwarding or
receiving traffic.
-
Down
— Indicates the LAG is not currently linked, and is not forwarding
or receiving traffic.
•
Speed — Displays the configured aggregated rate for the LAG. The
possible field values are:
-
10M
— Indicates the LAG is currently operating at 10 Mbps.
-
100M
— Indicates the LAG is currently operating at 100 Mbps.
-
1000M
— Indicates the LAG is currently operating at 1000 Mbps.
•
Flow Control — Displays the flow control status of the LAG.
-
Enable
— Indicates that the Flow Control is enabled.
-
Disable
— Indicates that the Flow Control is disabled.
-
Auto Negotiati
Negotiation is a protocol between two link partners that enables a port
to advertise its flow control state to its partner.
•
LAG Mode — Displays the type of link aggregation. The possible field
values are:
-
LACP
— Link aggregation is set up using LACP.
-
Static
— LACP is disabled. Instead, link aggregation is set up.
contains the following fields:
on — Enables Auto Negotiation for the Flow Control. Auto
3
43