Device - General Tab - Kodak i4000 Plus Series Setup Manual

Device - General tab

40
The General tab allows you to set scanner-specific options and
provides access to scanner diagnostics.
Paper Source
• Automatic: looks for paper in the document feeder first. If there are
no documents in the input tray, the scanner will scan from the flatbed.
• Automatic - 100 Sheets: looks for paper in the input elevator first, if
there are no documents in the input elevator, the scanner will scan
from the flatbed. This selection is recommended when you are
scanning between 25 and 100 sheets from the input elevator.
• Automatic - 250 Sheets: looks for paper in the input elevator first, if
there are no documents in the input elevator, the scanner will scan
from the flatbed. This selection is recommended when you are
scanning between 100 and 250 sheets from the input elevator.
• Automatic - 500 Sheets: looks for paper in the input elevator first, if
there are no documents in the input elevator, the scanner will scan
from the flatbed. This selection is recommended when you are
scanning between 250 and 500 sheets from the input elevator.
• Document Feeder: the input elevator is in the highest position. This
selection is recommended when you are scanning 25 sheets or less
from the input elevator.
• 100 Sheets: this selection is recommended when you are scanning
between 25 and 100 sheets from the input elevator.
• 250 Sheets: this selection is recommended when you are scanning
between 100 and 250 sheets from the input elevator.
• 500 Sheets: this selection is recommended when you are scanning
between 250 and 500 sheets from the input elevator.
• Flatbed: scanner will scan from the flatbed.
A-61653/TWAIN August 2013