Preview Area - Kodak i4000 Plus Series Setup Manual

Preview area

A-61653/TWAIN August 2013
Toolbar buttons
Zoom In: enlarges the image that is currently being displayed in
the preview area.
Zoom Out: reduces the image that is currently being displayed
in the preview area.
Rotate Outline: rotates the outline 90 degrees.
NOTE: This is only available if the rotated outline fits in the
scanner's maximum width.
Center Outline: adjusts the X origin of the outline such that the
outline is centered within the scanner's maximum width.
Preview Quality: selects the quality of the scanning image.
• Normal: displays acceptable image quality at a lower
resolution.
• High: displays the most accurate representation of the actual
image. The image that is displayed in the preview area is a
good representation of what the final image will look like.
NOTE: Depending on the document content, you may need to
zoom in to see a true representation of the image.
Units: selects the unit of measurement for the scanner; this
includes the preview area and any size-related options. The
Units options are: Inches, Centimeters and Pixels.
The preview area displays a sample image that is based on your
current shortcut settings. An image will be displayed in this area after a
preview scan has been performed.
Outline — if you select Document: Manually Select or Image: Part of
document on the Size tab, the preview area will also show the current
Outline selections. If the outline does not align with your preview image,
you may use the mouse to adjust the size and location of the outline. As
the mouse cursor moves around the outline, the cursor will change
indicating that you can adjust the outline by pressing and holding the
left mouse button.
• Move: place the mouse cursor within the outline to adjust the location
of the outline.
• Corner: place the mouse cursor over one of the corner graphics to
adjust two sides at the same time.
• Side: place the mouse cursor over one of the side graphics to adjust
that side.
13