Kodak i30 Quick Tips

CLEANING THE IMAGING GUIDE AND
PAPER SENSORS
1. Remove dust and debris from this area by using a Stati-
cide wipe or a small brush. Be careful not to scratch the
glass when cleaning.
2. Wipe the imaging guide with a Staticide wipe.
IMPORTANT:Staticide wipes contain isopropanol which can
cause eye irritation and dry skin. Wash your
hands with soap and water after performing
maintenance procedures. Refer to the User's
Guide for MSDS acquisition.
3. Wipe the imaging guide again with an almost-dry
Staticide wipe to remove any streaks.
4. Clean the reflector spot using the almost-dry Staticide
wipe to remove any dust or streaks.
K NUMBER, SERIAL NUMBER AND DATA-
PLATE LOCATION
The K Number, Serial Number and Dataplate can be found
on the bottom of the scanner.
To access the dataplate:
Carefully tilt the scanner back until you can see the
•
dataplate on the bottom of the scanner.
Serial number and
Dataplate
SUPPLIES*
CAT No.
174 7849
853 5981
896 5519
Reflector spot
* Items are subject to change.
Imaging guide
.
EASTMAN KODAK COMPANY
Document Imaging
Rochester, New York 14650
K number
Kodak and Digital Science are trademarks of Eastman Kodak Company.
© Eastman Kodak Company, 2004
A-61526
Description
Kodak Feed Module / for i30/i40
Scanners
Kodak Digital Science Roller Cleaning
Pads (qty 24)
Staticide Wipes for Kodak Scanners
(qty 144)
Kodak i30/i40 Scanners
Quick Tips
www.kodak.com
Kodak Service
1-800-822-1414
Kodak Parts Services
1-800-471-0803
1-585-724-6042
Kodak Professional Services
1-800-525-6325