Adjustments Tab: Color Or Grayscale - Kodak i4000 Plus Series Setup Manual

Adjustments tab: color or
grayscale
22
The options available on the Adjustments tab depend on the Scan as
selection on the General tab. The following options are based on a
Scan as selection of Color or Grayscale.
NOTE: Most options have additional settings. Those settings will only
be visible when the option is turned on. If all of the settings do
not fit on the screen, a scroll bar will be displayed giving your
access to all settings.
Brightness and contrast
• (none)
• Manual: allows you to se specific values that will be used for all
images:
- Brightness — changes the amount of white in the color or
grayscale image. The values range from -50 to 50.
- Contrast — makes the images sharper or softer. The values range
from -50 to 50.
Color Balance
• (none)
• Manual: allows you to set specific values that will be used for all
images:
- Red — changes the amount of red in the color image. The values
range from -50 to 50.
- Blue — changes the amount of green in the color image. The
values range from -50 to 50.
- Green — changes the amount of blue in the color image. The
values range from -50 to 50.
NOTE: Color Balance is not available for Grayscale images.
A-61653/TWAIN August 2013