Enhancements Tab - Kodak i4000 Plus Series Setup Manual

Enhancements tab

24
The options on the Enhancements tab depend on the Scan as selection
on the General tab.
NOTE: Most options have additional settings. Those settings will only
be visible when the option is turned on. If all settings do not fit
on the screen, a scroll bar will appear giving you access to all
settings.
Hole Fill — allows you to fill in the holes that are around the edges of
your document. The types of holes that are filled include: round,
rectangular, and irregularly shaped (e.g., double-punched or those
having a slight tear that could have occurred when the document was
removed from a binder).
• On: turns hole fill on.
NOTE: Do not turn Hole Fill on if you are scanning photos.
Blank Image Detection — allows you to configure the scanner to not
give blank images to the scanning application.
• (none): all images are given to the scanning application.
• Based on Document Content: images will be considered blank
based on the document content within the image.
- Content amount: allows you to select the maximum amount of
content that the scanner will consider to be blank. Any image that
has more content than this value will be considered non-blank
and will be given to the scanning application. The values range
from 0 to 100 percent.
A-61653/TWAIN August 2013