Device - General Tab - Kodak i5000 series Setup Manual

Device - General tab

40
The General tab allows you to set scanner-specific options and
provides access to scanner diagnostics.
Paper Source
• Document Feeder: the input elevator is in the highest position. This
selection is recommended when you are scanning 25 sheets or less
from the input elevator.
• 100 Sheets — this selection is recommended when you are
scanning between 25 and 100 sheets from the input elevator.
• 250 Sheets — this selection is recommended when you are
scanning between 100 and 250 sheets from the input elevator.
• 500 Sheets — this selection is recommended when you are
scanning between 250 and 500 sheets from the input elevator.
• 750 Sheets — this selection is recommended when you are
scanning between 500 and 750 sheets from the input elevator.
Power Saver — allows you to set the amount of time, in minutes, the
scanner has to be inactive before going into power saver mode.
Power Off — allows you to set the amount of time, in minutes, the
scanner has to be in power saver mode before it automatically turns off.
NOTE: The Power Saver setting is shared with all Setting Shortcuts.
Any changes will affect other shortcuts unless you turn on the
Only save to this Setting Shortcut option.
A-61671 / TWAIN February 2013