Kodak i4000 Plus Series Setup Manual page 30

A-61653/TWAIN August 2013
White background — when turned on, indicates which side(s) of the
document will see White instead of Black where there is no paper.
• (none): uses the Black background for the front and back sides.
• Both Sides: uses the White background for the front and back sides.
• Front Only: only uses the White background for the front side, the
back side will use Black. This option is only available when Input
document is is set to Two Sided and Different settings per side is
turned on; or Input document is is set to One Sided - Front.
• Back Only: only uses the White background for the back side, the
front side will use Black. This option is only available when Input
document is is set to Two Sided and Different settings per side is
turned on; or Input document is is set to One Sided - Back.
The following are examples of when white background is used:
• Scanning non-rectangular documents and, in the final image, you
want the area outside the document to be White instead of Black.
• Scanning lightweight or thin paper, with printing on one side, and you
do not want the black background to bleed through the document and
appear in the final image.
Images per side — indicates how many images the scanner will create
for a side, based on your imaging selections.
• One: indicates you want the scanner to create one image.
• One - Based on Document Content: indicates you want the
scanner to automatically detect if the document is color/grayscale or
black and white.
• One - Based on Toggle Patch: indicates you want to tell the
scanner, via a toggle patch document, if the document is color/
grayscale or black and white.
• Multiple: indicates you want the scanner to create more than one
image.
NOTE: If you select One - Based on Document Content from the
Images per side option, the Content Settings tab will be
displayed.
29