Kodak i4000 Plus Series Setup Manual page 42

A-61653/TWAIN August 2013
NOTE: Automatic and Flatbed options are only available if you had
the flatbed accessory attached when the scanning application
connected to the scanner.
Power Saver — allows you to set the amount of time, in minutes, the
scanner has to be inactive before going into power saver mode.
Power Off — allows you to set the amount of time, in minutes, the
scanner has to be in power saver mode before it automatically turns off.
NOTE: The Power Saver setting is shared with all Setting Shortcuts.
Any changes will affect other shortcuts unless you turn on the
Only save to this Setting Shortcut option.
Document Feeder
• Timeout: allows you to select the amount of time, in seconds, the
scanner will wait once the last document enters the feeder before the
timeout occurs. This option can be turned off.
• Action when timeout occurs: indicates the action that will be taken
when the document feeder timeout has been reached.
- Stop Scanning: scanning will stop and control will return to the
scanning application (i.e. ends the job).
- Pause Scanning: scanning will stop but the scanning application
will be waiting for additional images (i.e., stops the feeder).
Scanning may be resumed by pressing the Start/Resume button
on the scanner. Scanning may be stopped by pressing the Stop/
Pause button on the scanner or via the scanning application.
Automatically Start Scanning — if selected, the scanner will wait for
up to 10 seconds for documents to be placed in the input elevator
before scanning will begin. In addition, once the input elevator has been
emptied, the scanner will automatically resume scanning when paper is
placed in the input elevator. The scanner will wait the amount of time
specified by the document feeder timeout.
NOTE: The Document Feeder settings are shared with all Setting
Shortcuts. Any changes will affect other shortcuts unless you
turn on the Only save to this Setting Shortcut option.
Sheet Counter — enter the number to be assigned to the next physical
sheet of paper entering the scanner. This is incremented sequentially
by the scanner and is returned in the image header.
NOTE: Changing this will affect the Counter option on the Device -
Printer tab.
41