Heating Element Safety Device Reset - ELEKTRA Professional espresso coffee machines User Manual

13.5 HEATING ELEMENT SAFETY DEVICE RESET

The menu to reset the heating element safety device is displayed as follows:
The heating element safety device activated status is displayed as follows:
The heating element safety device unactivated status is displayed as follows:
In this case, after having repaired the fault, press "ENTER" to reset.
14 USING BASIC PROGRAMMING (K-Kwts)
1) Insert the key in the lock on the control panel, gently press and turn it clockwise:
the machine automatically enters a state of partial operation suitable for programming.
2) The instructions for the using the main menu appear on the display: after confi rming
by pressing "Enter" on the control panel, press any of the coffee buttons marked
with the "+" sign to scroll the menu to reach the desired topic.
3) Press "Enter" to confi rm the choice of the topic and access further instructions.
To change numerical values press the "+" and "-" keys to increase or decrease respectively.
Then save the data by pressing "Enter".
4) Upon completing programming or consultation of the various topics, turn the key
counter-clockwise and remove it from the lock: the machine automatically resumes
full operation.
In general, therefore, the "+" key is used to select the topics or information required and both
"+" and "-" keys are used to change the parameters, but always with the possibility to restore
the initial situation.
Data are only saved defi nitively on pressing "Enter".
Carefully follow the instructions step by step as they appear on the display – they provide
a complete guide to programming.
79