Measuring The Water Supply Pressure (15 Indice); Protecting The Heating Elements (C16); Warming The Cups (C10 2Go); Lighting Of The Work Counter - ELEKTRA INDIE Instruction Manual

10 MEASURING THE WATER SUPPLY PRESSURE
The same sensor, referred to in the previous paragraph, measure when the water pump
is stopped, the water supply pressure with which the apparatus is fed. Value displayed on
the same V3 screen.
Enables automatic protection in the event of a water supply stoppage., by halting the
machine.
11
PROTECTION OF THE HEATING ELEMENTS
The three boiler resistance values, 1170 W each for the 2 group model and 1830 W each for
the 3 group model, and the resistances of each dispensing group, each of 800W, are pro-
tected from overheating.
Such protection is made by means of a thermostat for the boiler and of a thermostat
for each group, all with manual reloading, which control the cutting off of power to the hea-
ting elements. (C17 ITA)
In each of following cases:
- Excessive duration of heating.
- Exceeding of maximum allowable temperature value,
the heating elements are disabled and a major fault is reported
on screen V1.
12 WARMING THE CUPS
The equipment is fitted with a heated cup tray that allows the cups to be kept hot for a good
final result of the infusion.
The heating is obtained by a series of heating plates, each fitted with 60W resistance, which
self-stabilises the temperature.
Three plates for the 2 group model, four plates for the 3 group model.
13

LIGHTING OF THE WORK COUNTER

The machine is fitted with neutral white light lighting of the cup tray during dispensing.
It allows a clear and correct view of the result in the cup by assessing the colour of the extract.
It is made with a high power spot LED positioned above each group.
14 BODY LIGHTING
The machine is equipped with multi-color led lights of the posterior side (opposite side with
respect to the work side) of the body, which highlights its design features and visibility.
The colours can vary continuously or a fixed colour can be selected at will.
SOUND EMISSION
15
Weighted sound emission level A: 80dB uncertainty 1dB.
28
C15 ITA)
(C18 ITA)
(C10 2GO)
(C21 ITA)
(C12 2GO)
(C17)