Connections; Connecting A Camera, Monitor And Microphone; Connecting A Switcher - Sony SVT-S480ES Operating Instructions Manual

Connections

Turn all the power off before making connections.
Connect the AC power cord last.
Connecting a Camera, Monitor
and Microphone
With the following connections, you can monitor the
picture and sound.
Microphone
to AC
IN
to a wall outlet
to video output
Video camera
Use of BNC connector
Align pin with cutout, insert and
turn right to lock.
To remove, turn left and pull out.
If the equipment to be connected has an S-
VIDEO connector
You can connect to this VCR's S-VIDEO jacks using
an S-VIDEO cable.
If both S-VIDEO and VIDEO IN jacks are used at the
same time, the equipment connected to the S-VIDEO
IN jack has priority.
To connect an alarm sensor
Refer to page 35.
10
S-VIDEO
IN/OUT
to MIC IN
to VIDEO IN to
VIDEO
OUT
to video
input
Monitor

Connecting a Switcher

to SW OUT
Video camera
to EXT
TIMING
IN
Camera switcher
Note
When you connect several cameras to a switcher,
synchronize the cameras.
If not, the picture will be disturbed.
to VIDEO
IN
Monitor
to MONITOR OUT