Selecting The Tape - Sony SVT-S480ES Operating Instructions Manual

Selecting the Tape

This VCR is designed and calibrated for 120-minute or
160-minute tape (T-120 or T-160). To ensure stable
operation and optimum picture quality, we recommend
that you use a Sony 120-minute tape for long recording
in SP mode.
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
< >
MAIN MENU
1. LANGUAGE
CLOCK SET
DAYLIGHT SET
2. DISPLAY SET
BUZZER
SW OUT
3. ALARM SET/1SHOT REC
4. GENERAL SET
5. TIMER SET
6. HOLIDAY SET
7. POWER FAILURE/DEW
USED HOUR
8. ALARM DATA
SELECT : NEXT : RETURN : MENU
3
Press MENU B.
The GENERAL SET menu appears.
GENERAL SET
REC MODE SP
TAPE T–120
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
PB S–VHS AUTO
BAUD RATE 1 9 2 0 0
<NEXT PUSH >
+
–
SELECT : DATA SET : / RETURN : MENU
4
Press MENU V to move the flashing to the setting
of TAPE.
20
2-5 6
5
Set to T-120 or T-160 by pressing MENU + or –.
6
Press SEARCH/AUDIO ON to return to the
normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.