Troubleshooting - Kyocera DF-760 Operation Manual

English

Troubleshooting

Paper
Clearing Paper Jams
When a paper jam occurs, copying stops and the machine operation panel will display a message indicating a
paper jam has occurred.
NOTE:
Leave the main power switched ON ( | ) while performing the procedure to clear paper jams. The
machine operation panel will return to the display previous to the paper jam when the paper jam has been
cleared.
Coupling Section
20 DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
If ejected copies are not flat or are stacked unevenly,
turn over the paper in the cassette and reload it. If
copies are curled, refer to Curled Output on page 31.
If a paper jam occurs, check the side guide located in
the cassette is adjusted to the size of paper loaded.
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the coupling
section between the Document Finisher and the
machine.
1
While pushing the finisher release lever, pull the
finisher out from the machine.