Maintenance - Kyocera DF-760 Operation Manual

English

Maintenance

Replacing Staples
The finisher contains staple cartridge holder A.
The optional folding unit contains staple cartridge holders B and C. The refill procedure for staple cartridge
holders B and C are the same as for staple cartridge holder A.
If a message displays indicating that staples have run out, the staple cartridge holder need to be replenished
with staples.
NOTE:
If the Staple Unit runs out of staples, contact your service representative or the place of purchase.
Refilling Staple Cartridge Holder A
Follow the steps below to refill staples.
NOTE:
See page 18 to refill staple cartridge holder B/C of the optional folding unit.
16 DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8).
3
Remove the staple cartridge holder.