Basic Operation - Sharp AY-AP18GR Operation Manual

Split type room air conditioner
Hide thumbs Also See for AY-AP18GR:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

BASIC OPERATION

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature set-
ting and mode are automatically selected
according to the room temperature when
the unit is turned on.
Modes and Temperature Settings
Room temp.
Automatic Operation
at operation
start-up
Mode Temperature Setting
Below 21°C HEAT
21°C-24°C
DRY
24°C-26°C
COOL
26°C-28°C
COOL
Above 28°C COOL
2
5
3
1
4
23°C
Room Temp. at start-up
24°C
25°C
26°C
Press the MODE button to select
1
the operation mode.
AUTO
Press the ON/OFF button to start
2
operation.
• The red OPERATION lamp (
unit will light.
Press the TEMP. button to set the
3
desired temperature.
AUTO/DRY MODE
The temperature can be changed in 1°C
increments within the range of 2°C higher
to 2°C lower from the temperature auto-
matically determined by the air conditioner.
COOL/HEAT MODE
The temperature can be set within the
range of 18 to 32°C.
Press the FAN button to set the
4
desired fan speed.
AUTO
SOFT
• In the DRY mode, the fan speed is pre-
set to AUTO and cannot be changed.
To turn off the unit, press the ON/
5
OFF button again.
• The red OPERATION lamp (
unit will turn off.
E-8
HEAT
COOL
DRY
) on the
LOW
HIGH
) on the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ay-ap24grAe-a18grAe-a24gr

Table of Contents