Extron electronics IPL T S1 Setup Manual page 12

Figure 4.
Using GC you can configure a single room controller or create a
Web-based remote monitoring system for hundreds of A/V devices in
multiple locations.
You can configure an IPL T controller using GC without having the
device physically connected to the A/V network.
CAUTION:
NOTE:
6 IPL T Series • Introduction
Global Configurator Application Screen
Use Global Configurator version 3.0 or later. Update
all PCs and devices running earlier versions of GC.
Ethernet driver support requires Global Configurator 3.0
and firmware version 1.15 or higher.