Function Keys Screen - Extron electronics FPC 5000 User Manual

Matrix 12800 Operation, cont'd

Function Keys screen

The Function Keys screen (figure 3-19) lets you program an SIS command or a
series of commands (a macro) to the 14 white/purple User Function buttons or to
edit the button assignment. The User Function buttons are always present on the
left side of the screen.
It is not the function of this manual to define the Matrix 12800 SIS commands. For
detailed information on these commands, refer to the Matrix 12800 Wideband, Sync,
or Audio Switchers User's Manual, part #68-556-01.
Assign SIS commands to User Function buttons or edit the button assignment as
follows:
1.
Figure 3-19 — Function Keys screen
2.
3.
4.
3-30 FPC 5000 Front Panel Controller • Matrix 12800 Operation
Only personnel logged in as administrators can set User Function keys.
Touch the blue Admin > purple Misc > gray Function Keys buttons.
If necessary to reach the higher-numbered function keys, touch the green
Show 8 - 14 button.
Touch the Name field for the button you want to program (Key 1 = User
Function button 1). The on-screen keyboard appears.
Enter the desired function name using the on-screen keyboard.
The Function Keys screen appears (figure 3-19).