Table of Contents
Advertisement
Viewing outputs tied to a specified input
View the output tied to a selected input as follows:
1.
If necessary, touch the View Outputs button.
selected View Ties: output-by-input-selection screen appears. See
on figure 3-8.
2.
If necessary, touch the Change View button
figure 3-8.
Select the video and/or audio format(s) to view by touching the
3.
desired blue Signal Type button(s). The first virtual input among
the selected signal types is displayed in the Virtual Input field.
Available signal types are indicated by a green circle.
Video signal types (RGBHV, RGBS, RGsB, YUV, YC, and
Video) include the audio plane (if there is one in your system).
The Audio Only signal type does not include any video planes.
If one or more outputs is tied to that virtual input, the first
tied output is displayed in the Video Out (and/or Audio Out)
field.
Text blocks directly under the Video Out and Audio Out fields
identify the quantity of outputs that are tied to the selected virtual input.
If no output is tied to that virtual input, the Video Out and/or Audio Out
fields are blank.
4.
Use the Video Out and Audio Out scroll boxes to see a listing of all of the
outputs tied to the selected virtual input. Outputs that are not tied to that
virtual input are not included in the scroll box.
5.
Use the input keypad or scroll through the valid inputs to select another
virtual input for which you desire to view the tied outputs.
Leading zeroes are not required for keypad entry.
If you enter a number for a virtual input that does not exist in the
Matrix 12800, the number is displayed in red in the keypad
display.
Observe that the first output tied to the selected virtual input
6.
is displayed in the Input Video and/or Input Audio field.
To view the outputs tied to another input, repeat steps 5 and 6.
7.
Viewing all ties
View all of the ties by touching the green Change View button.
View Ties: alternate screens appears. See
screen, the output scroll bars, keypad, and fields are replaced with a grid that
shows all outputs and the inputs that are tied to them. You can choose whether the
view is by-inputs or by-outputs by touching the green View Inputs button
or View Outputs button
two screens. The biggest difference is that if you have selected the View Ties:
outputs-by-input-selection screen, when you select a virtual input (either using the
scroll bars or the keypad) all of the virtual outputs are displayed in red in the grid.
This gives you an easy way to see all of the outputs tied to an input at a glance.
FPC 5000 Front Panel Controller • Matrix 12800 Operation
to display screen
and
on figure 3-8. On the alternate
3
4
, although there is very little difference between the
The most recently
and
2
4
on
2
One of the
3-13
Advertisement
Table of Contents
