Table of Contents
Advertisement
Matrix 12800 Operation, cont'd
View the ties as follows:
1a.
1b. From the Make Ties screen, touch the green View Ties button.
2.
3.
4.
Viewing inputs tied to a specified output
View the input tied to a selected output as follows:
1.
2.
3.
4.
5.
6.
3-12
FPC 5000 Front Panel Controller • Matrix 12800 Operation
From any screen other than the Make Ties Screen, touch the blue User >
amber I/O buttons.
The FPC displays one of the View Ties screens. The screen view that the FPC
displays is the last View Ties screen that was active.
To select the View Ties: input-by-output-selection screen, touch the green
View Inputs button.
To select the View Ties: outputs-by-input-selection screen, touch the green
View Outputs button.
To select the View Ties: alternate screen, touch the green Change View button.
If necessary, touch the View Inputs button.
selected View Ties: input-by-output-selection screen appears. See
on figure 3-8.
If necessary, touch the Change View button
figure 3-8.
Select the video and/or audio format(s) to view by touching the
desired blue Signal Type button(s). The first virtual output
among the selected signal types is displayed in the Virtual
Output field.
Available signal types are indicated by a green circle next to the
buttons. Selected signal types are indicated by a red ring around
the green circle.
Video signal types (RGBHV, RGBS, RGsB, YUV, YC, and Video) include the
audio plane (if there is one in your system). The Audio Only signal type does
not include any video planes.
If an input is tied to that output, the input is displayed in the Input Video
(and/or Audio) field.
If no input is tied to that output, the Input Video and Audio fields display 0.
Use the output keypad or scroll through the valid outputs to select another
output for which you desire to view the tied input.
Leading zeroes are not required for keypad entry.
If you enter a number for a virtual output that does not exist in the
Matrix 12800, the number is displayed in red in the keypad display.
Observe that the input tied to the selected output is displayed in the Input
Video and/or Input Audio field.
To view the input tied to another output, repeat steps 4 and 5.
The most recently
and
1
3
to display screen
on
1
Advertisement
Table of Contents
