Table of Contents
Advertisement
6.
On the rear of the FPC, support the CD tray from behind with one hand while
you snap the program CD onto the tray spindle with the unlabeled (program)
side of the CD facing into the tray (figure 2-12).
Figure 2-12 — Inserting the program CD into the CD tray
7.
On the rear of the FPC, gently push the CD tray back into the FPC computer
until it locks in place.
8.
On the front panel, touch on the gray OK button.
9.
Follow the on-screen instructions.
10.
When the installation is complete, on the rear panel, press the eject button on
the CD-ROM drive. The drive's LED flashes and the CD tray partially ejects.
11.
Gently pull the CD tray to its fully extended position.
12.
Support the CD tray from behind with one hand while you snap the program
CD off of the tray spindle.
13.
Gently push the CD tray back into the FPC computer until it locks in place.
FPC 5000 Front Panel Controller • FPC Installation and Operation
C O
M 2
C O
M 3
C O
M 4
C O
N
P R
3 0 V
V -2
1 0 0
D I O
A C
U T
IN P
2-11
Advertisement
Table of Contents
