Table of Contents
Advertisement
Proximity/ambient light sensor board
Description
Proximity/ambient light sensor board (includes cable)
Before removing the front-facing proximity/ambient light sensor board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
a.
Middle frame (see
b.
FPC cable (see
c.
System board (see
Remove the proximity/ambient light sensor board:
1.
Detach the proximity/ambient light sensor board from the display panel assembly. (The proximity/
ambient light sensor board is attached to the display panel assembly with double-sided adhesive.)
2.
Remove the proximity/ambient light sensor board and cable.
Reverse this procedure to install the proximity/ambient light sensor board.
26
Chapter 5 Removal and replacement procedures
Back cover on page
Middle frame on page
FPC cable on page
19)
System board on page
12), and then remove the following components:
14)
23)
Spare part number
751314-001
Advertisement
Table of Contents
