Table of Contents
Advertisement
2.
Remove the rear-facing webcamera (2) and cable.
Reverse this procedure to install the rear-facing webcamera.
WiFi antenna board
Description
WiFi antenna board (includes RF antenna cable and double-sided adhesive)
Before removing the WiFi antenna board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the middle frame (see
Remove the WiFi antenna board:
1.
Disconnect the WiFi antenna board cable from the system board wireless terminal (1).
2.
Release the WiFi antenna board cable from the routing channel (2) between the battery and
the system board.
18
Chapter 5 Removal and replacement procedures
Back cover on page
12).
Middle frame on page
Spare part number
751315-001
14).
Advertisement
Table of Contents
