Figure 2-1. Installation Of Optional Rear-Mounting Support Bracket Kit - Comtech EF Data CDD-880 Installation And Operation Manual

CDD-880 Multi Receiver Router
Installation
The kit is installed as illustrated in Figure 2-1 and per the following procedure:
Step Description
Secure the Adapter Plates to each side of the chassis at the rear, using the #10
1
flat head screws as shown.
Secure the #10 shoulder screws through the Adapter plate mounting slots using
2
the #10 flat washers, #10 split washers, and #10 hex nuts as shown.
Install the rear support brackets onto the equipment rack threaded rear mounting
3
rails, using the #10 rack bracket bolts.
Mount the unit into the equipment rack, ensuring that the #10 shoulder screws
4
properly engage into the slots of the rear support bracket.

Figure 2-1. Installation of Optional Rear-Mounting Support Bracket Kit

2–3
Revision 0
MN-CDD880