Features; Physical Description; Standard Assemblies; Optional Assemblies - Comtech EF Data CDD-880 Installation And Operation Manual

CDD-880 Multi Receiver Router
Introduction
1.3

Features

1.3.1

Physical Description

The CDD-880 Multi Receiver Router is constructed as a 1RU-high rack-mounting chassis, which
can be free-standing if desired. Handles at the front to facilitate removal from and placement into
a rack.
The unit uses a single printed circuit board assembly for high reliability. All operational upgrades
and enhancements are afforded via remote firmware upgrade.
1.3.1.1

Standard Assemblies

Assembly
PL-0000772
PL-0000763
PL-0000764
FS-0000030
1.3.1.2

Optional Assemblies

Assembly
PL-0000866
KT-0000168
KT-0000195
1.3.2

Compatibility

The CDM-880 receives VersaFEC interoperable with Comtech EF Data's CDM-840 Remote
Router, and the CDM-625 Advanced Satellite Modem when equipped with the optional IP Packet
Processor.
Description
CDD-880 Base Chassis Assembly (AC)
CDD-880 Main PCB
CDD-880 Dual Demodulator Board
Cartridge Fuse, 2.5A 250VAC 5x20mm Slow-blow fuse,
213 series
Description
CDD-880 Base Chassis Assembly (DC)
4" Rear-Mounting Support Bracket
10" Rear-Mounting Support Bracket
1–3
Revision 0
MN-CDD880
Where Installed
–
CDD-880 chassis
CDD-880 chassis
CDD-880 chassis
Where Installed
–
Sides of CDM-840 chassis / rear
of user-provided mounting rack
– See Sect. 2.2.1