Table of Contents
Advertisement
CDD-880 Multi Receiver Router
Flash Upgrading
9
Transfer the files:
Type "put FW0000423x.bin" (where 'x' denotes the revision letter) to begin the file transfers.
It will take a few seconds to transfer the file.
The process sequences through several blocks – this may take several minutes. When the
upgrade image has been received, the image will be written to flash memory and the message
"UPLOAD COMPLETE" will be displayed.
10
Verify the file transfer.
a) Terminate the FTP session by typing "bye" and closing the Command-line window.
b) Verify that the new file loaded using either the CONSOLE or Web interface as
11
Select the desired Slot (image) to boot:
Via the Web Server Interface's Admin | Firmware page, use the 'Boot From:' drop-down
menu to select Latest, Slot 1, or Slot 2, then click [Submit] to save the desired setting.
By default, the unit will boot to the Slot that stores the firmware version having the latest date
(Boot From: Latest).
Reboot the CDD-880. The firmware upgrade is implemented at this time.
12
Flash Upgrading of the CDD-880 Multi Receiver Router is now complete.
described in Step 1.
4–4
Revision 0
MN-CDD880
Advertisement
Table of Contents
