Table of Contents
Advertisement
Appendix A. RCS11 DIP Switch
Configuration
The RCS11 has four internal DIP switches that are accessible only by removing the top cover. These DIP
switches S2, S3, S4 & S5 are used to configure Interface options, data rates and remote baud rates. An
upgrade or change from an existing interface or configuration to another may require a change to one or
more of the DIP switch settings. If you are having trouble with DIP switch settings, contact Radyne
Customer Service for any additional help.
Figure A-1 Illustrates the DIP switch positions for the various Radyne product types.
Figure A-2 Illustrates the unit Addressing for and Baud Rate switch positions for remote M&C.
Figure A-1. DIP Switch Positions for the Different Radyne Devices
MN-RCS11 – Revision 9
A–1
Advertisement
Table of Contents
