Back Of The Switch - HP ProCurve 5400zl Installation And Getting Started Manual

Restoring Factory Default Configuration - When pressed with the
■
Reset button in a specific pattern, the Clear button clears any configura-
tion changes you may have made through the switch console, the web
browser interface, or SNMP management, and restores the factory default
configuration to the switch. For the specific method to restore the factory
default configuration, see "Restoring the Factory Default Configuration"
in chapter 4, "Troubleshooting" of this manual.

Back of the Switch

.
AC power connector
Figure 1-7. Back of a 5406zl Switch with One Power Supply
Figure 1-8. Back of a 5412zl Switch with two Power Supplies
Introducing the ProCurve Series 5400zl Switches
Grounding lug
mounting holes
Slot for installing optional
redundant power supply
Power and Fault LEDs
External PoE
power connectors
Back of the Switch
1-11