Download Print this page

HP ProCurve 5400zl Installation And Getting Started Manual Page 38

Procurve 5400xl series switches and zl power supply shelf.
Hide thumbs


Installing the Series 5400zl Switches
Installation Procedures
Once the power supply is installed, tighten the four retaining screws that hold
it in place. The screws can be tightened with either a flat-bladed or Torx T-10
screwdriver. Be careful not to overtighten the screws.
Figure 2-4. Back of Switch with Power Supply Fully Installed
tighten the four screws


   Related Manuals for HP ProCurve 5400zl

Comments to this Manuals

Symbols: 0
Latest comments: