LCD Operation
Messages
Silent Messaging (Busy Station)
An audible tone and an LCD message can be sent to an LCD station that is busy. The
busy station can return a message to the calling station LCD. The two stations may
continue this procedure to carry on a "silent" conversation.
1. Press
when you receive a
busy tone.
2. Enter the message
number.
3. Press
To return to a busy station message after receiving a busy station message
1. Press
2. Enter the message
number.
94
02'(
+
The called number is
displayed,
you are prompted for the
message number.
Station message (10~19)
and system message
(60~99). The LCD displays
the message. This assumes
the message is already
stored in memory.
3$*(
.
The destination station
beeps four times and the
message displays for 30
seconds or until you hang
up.
Your LCD confirms the
message was sent.
02'(
+
.
You are prompted for the
message number.
Station message (10~19) and system message (60~99).
The LCD displays the message. This assumes the
message is already stored in memory.
=[DN], and
210
Strata DK Electronic Telephone 5/99
OVER TO ST210
MSG NO?
MSG SENT
OVR TO ST210
MSG NO?