3$*(
3. Press
Memos
Speed Dial Memos
You can store names (12 characters maximum) for each of 40 station speed dial
numbers. The memo pad of names can be scrolled to select the appropriate party. The
station must be enabled via system programming for LCD message memory.
To program Speed Dial names and numbers
5'/
1. Press
6'6
then
2. Dial a station speed
dial code.
02'(
3. Press
4. Enter the name or
memo (12 characters
maximum).
02'(
5. Press
6. Enter a phone number
(16 characters
maximum).
Strata DK Electronic Telephone 5/99
.
Your LCD confirms the
message was sent.
(or ),
(or
).
See
Table 14 on Page 110
for speed dial codes.
.
If a name was previously
stored on this code, it
appears on the top line.
The name appears on the bottom line as you enter it.
("To enter LCD characters" on Page
.
The number displays on the top line as you enter it.
LCD Operation
MSG SENT
# * 10 SPEED DIAL
*10 NAME
SPEED DIAL
86.)
Memos
95