Remote Calling Station Messaging; Busy Station Messaging - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL LCD TELEPHONE
9. Press the Mode button.
10. Dial 0.
To Receive a Called Station
Message:
1. Press the Intercom and
Msg button.
To Set a Calling Station
Message for Another Station:
1. Press the Mode button when
your telephone is idle.
2. Dial 9 5.
3. Dial the "destination" station
number.
4. Press the Page button.
5. Enter the desired message
number.
6. Press the Page button.
7. Press the Mode button.
8. Dial 0.
4-12
The LCD displays "MODE NO.?"
The LCD displays date/day/time. The LCD then displays "SENT NNM" at
originating station, and the originating station number and a message
indication are displayed on the destination station LCD.
The message will display on the destination station LCD.

REMOTE CALLING STATION MESSAGING

The LCD displays "MODE?"
The LCD displays "MODE 95 DEST EKT NO.?"
The LCD displays "MODE 95 DEST EKT NO.NN".
The LCD displays "MSG NO.?"
The LCD displays the message.
The LCD displays "MSG NO.?"
NOTE:
Remote calling station messaging allows you to set a calling station
message for only one station at a time.
The LCD displays "MODE NO.?"
Your LCD shows the time and date. The message is displayed at the
"destination" station. Any station calling the "destination" station receives
the message.

BUSY STATION MESSAGING

When reaching a busy or DND LCD station, a message can be sent to
that station (an audible tone will be heard). The busy or DND station may
also return a message to the calling station's LCD. The two stations may
continue this procedure to carry on a "silent" conversation.
MESSAGES AND MEMOS