Toshiba Strata DK User Manual page 130

Button Labels
Flexible Buttons
Table 16 Flexible Button Labels (continued)
Button Label
5/6
6$9(
6'
6'6
63.5
67$57
68%
721(
118
Release Button
Press to disconnect or complete the transfer of the current CO or [DN] call
and to place your station in the idle condition.
Save Button
After dialing an outside or internal directory number, press to "save" the
number. Later, you can have the system automatically redial the number for
you when you press the button after accessing an internal or outside line.
Speed Dial Button
Press to Speed Dial a telephone number or feature access codes. SD
buttons can be used as either System Speed Dial numbers or Station Speed
Dial numbers.
Speed Dial Select Button
Press to store and access Speed Dial number. If SDS is not programmed on
your telephone, you can substitute the * key for any of its referenced
procedures.
Speaker Button (Fixed)
Press to turn the speaker on and off. This button also selects a line or an
internal [PDN] if programmed for auto preference in system programming.
Also used to disconnect on-hook speakerphone calls.
Start Button
Press to make an outgoing call using an ISDN trunk.
Subaddress Button
Press to enter a subaddress on an ISDN trunk outgoing call.
Tone Button
Press to change the outgoing dialing of the CO line in use from dial pulse to
tone signaling.
Definitions
Strata DK Electronic Telephone 5/99