Buttons
There are two sets of buttons, fixed and flexible. The fixed buttons, such as
+2/'
&21)7516
,
flexible buttons consist of directory numbers (Primary, Secondary, Phantom) and
feature buttons. The number of preprogrammed flexible buttons varies by telephone.
Fixed Buttons
The fixed buttons are located below your dial pad and enable you to perform standard
functions quickly and easily.
Table 1
Fixed Button Instructions
Button
&21)7516
(Conference/Transfer)
+2/'
Strata DK Electronic Telephone 5/99
92/
, and
are shown in Figure 1 on the prior page. The
Press to set up conference and transfer calls (see
Calls" on Page
39).
Press once to hold internal or outside
calls (the CO LED flashes at the
internal hold rate)
...or press twice to enable Exclusive Hold. The CO LED flashes at
the exclusive hold rate.
Note
Exclusive Hold enables you to place a call on hold so that only
you or somebody using a Call Pickup code at another station
can retrieve it.
To retrieve a call on hold:
Press &2 or [DN] which is on hold
...or if the call is on Exclusive Hold,
from another station dial plus your [DN], or dial plus the
CO Line number (001~200) that the call is held on.
If a call is not retrieved by a certain time (set in system
programming), it recalls back to your phone. You hear repeated
recall tone (or if you are on the phone, you hear recall tone twice).
Instructions
HOLD LINE 10
JAN 01 SUN 12:19
HOLD LINE 201
LINE 10 RECALL
The Grand Tour
Buttons
0,&
,
"Conference
3