Section.4.-.Landing.gear.installation - Hangar 9 CAP 232G ARF Assembly Manual

Section 4 – Landing Gear Installation
Required Parts
•.Fuselage.
•.Wheel.pant.(left.and.right). •#8.washer.(4)
•.8-32.nylon.lock.nut.(4).
•.3/16".wheel.collar.(4).
•.8-32.x.3/4".socket.head.bolt.(4)
•.4-40.x.1/2".socket.head.screw.(4)
Required Tools and Adhesives
•.Hex.wrench:.5/32".
•.Felt-tipped.pen.
•.Adjustable.wrench.(small)

.Step 1
Install.the.axles.in.the.landing.gear..Secure.the.axles.using.
an.adjustable.wrench.and.the.nuts.provided.with.the.axles.

.Step 2
Install.the.landing.gear.using.four.8-32.x.3/4".socket.head.
bolts.and.four.#8.lock.washers.
16
•#8.lock.washer.(4)
1
•.3 / ".wheel.(2)
.
2
•#4.washer.(2)
•.Ruler
•.Square
 
. .Step 3
Install.the.following.items.onto.the.axle:.wheel.pant,.3/16".
wheel.collar,.wheel.then.another.3/16".wheel.collar.
 
. .Step 4
Secure.the.pant.in.place.using.a.4-40.x.1/2".socket.head.
screw.and.#4.washer..Use.threadlock.on.the.screw.to.
prevent.it.from.coming.loose.in.flight.