Redialing A Number; Parking A Call - Cisco 7960 User Manual

Chapter 3 Placing a Call and Other Basic Phone Tasks
Step 4

Redialing a Number

Parking a Call

Step 1
Step 2
Step 3
Step 4
78-10182-05
If you are using a handset, hang up.
If the party refuses the call, press the Resume soft key to return to the original
call.
To redial the most recently dialed number, press the Redial soft key. Doing so
without lifting the handset activates the speakerphone or headset.
To redial a number from a line other than your primary line, select the desired line
button and then press Redial.
Park a call when you want to store the call and then retrieve the call from another
phone in the Cisco CallManager system (for example, a phone in someone else's
office or in a conference room). Call park numbers are pre-configured for this
purpose by your system administrator.
Follow these steps to park a call.
Procedure
During an active call, press the more soft key until you see the Park tab.
Press Park. The LCD screen displays the special call park number at which the
call is stored. If the screen does not display a call park number, the call park
feature is not available to you.
Make a note of the call park number, then hang up. The call is parked at that
number, allowing you to retrieve it from another phone.
To retrieve the parked call from any phone in the Cisco CallManager system, dial
the call park number at which the call is parked.
Cisco IP Phone Models 7960 and 7940 User Guide
Making Telephone Calls
3-5