Making Telephone Calls
Placing a Call
Tip
Cisco IP Phone Models 7960 and 7940 User Guide
3-2
Parking a Call, page 3-5
•
Using Call Pickup, page 3-6
•
You can place a call with your Cisco IP Phone in any of the following ways:
Lift the handset and dial the number.
•
Press the line button that corresponds with your extension and dial the
•
number that you want to reach.
Press the NewCall soft key and dial the number.
•
If you are using a headset, press the Headset button and dial the number.
•
If you are using the speakerphone, press the Speaker button and dial the
•
number.
If you have established speed dial numbers, press a Speed dial button to place
•
a call to the corresponding number. See the
Buttons" section on page 4-7
Press the Dial soft key after selecting a number from one of several available
•
directories. See the
details.
Press the Redial soft key to automatically place a call to the most recently
•
dialed number.
To locate buttons, keys, and other parts on your phone, refer to the
Map to Your Cisco IP Phone" section on page
Chapter 3
Placing a Call and Other Basic Phone Tasks
for details.
"Using the Directories Button" section on page 4-18
"How to Set Up Speed Dial
"A Road
1-1.
for
78-10182-05