Using The Settings Button; Changing The Lcd Contrast - Cisco 7960 User Manual

Using the Settings Button

Using the Settings Button

Changing the LCD Contrast

Step 1
Step 2
Step 3
Step 4
Cisco IP Phone Models 7960 and 7940 User Guide
4-16
Use the Settings button to change the LCD contrast and the sound of the ringer.
You can also access network and phone status data from the Settings button. Your
system administrator might ask you to access this data in order to service or
configure your Cisco IP Phone.
This section covers the following topics:
• Changing the LCD Contrast, page 4-16
Changing the Ringer Sound, page 4-17
•
Accessing Network Configuration Data, page 4-17
•
Accessing Status Data, page 4-18
•
To improve the readability of the LCD, follow these steps to adjust the contrast.
Procedure
Press the Settings button.
From the Settings menu, use the Navigation button to select Contrast.
Press the Up or Down soft keys (or the Volume buttons) to set the desired contrast
level.
Press the OK soft key to accept and save your changes.
Tips
To restore your previously saved contrast setting—From the Settings menu,
•
use the Navigation button to select Contrast. Press the more soft key and then
the Restore soft key.
To restore the factory default contrast setting—From the Settings menu, use
•
the Navigation button to select Contrast. Press the more soft key and then the
Factory soft key.
Chapter 4 Getting Started with Feature Buttons
78-10182-05