Use Of Dip Switch - DesignTech AirWolf Installation Manual

1. Use of DIP switch / Loop
Manual / Automatic Loop
DIP Switch
Manual / Automatic Red Loop
● DIP Switch :
This unit is factory set for use with MANUAL TRANSMISSIONS. If
installing into a vehicle with an AUTOMATIC TRANSMISSION, Cut the
Manual / Automatic RED LOOP.
v4.2
DIP Switch
Used in the programming of the Tach. signal. Set to Program when
learning Tach signal. Return to Operate (up position) after learning.
The hood and Dip Switch One are connected internally. Switch
One down = hood open. Switch one up = hood closed. Note that
when switch one is down the remote may indicate the hood is
open.
DIP Switch
OFF Normal
Program
ON
5